Show Wireless Ports Interface Client-Scan Configuration - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface client-scan configuration

show wireless ports [<portlist> | all] interface [1 | 2] client-scan
configuration
Description
Displays the current configuration of the client scan feature.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Displays the current configuration of the client scan feature, including:
Port:
Interface
Enabled:
Send Added:
Send Removed:
Timeout:
Max Size:
Examples
The following example displays the current configuration of the client scan feature on port 1:5 and
interface 1:
show wireless ports 1:5 interface 1 client-scan configuration
It produces output similar to the following:
Summit300-48:15 # show wireless ports all interface 1 client-scan configuration
Intf Enabled
-------------------------------------------------------------------------------
1:5:1 N
ExtremeWare 7.5 Command Reference Guide
The port number used in the scan
1 or 2
Y (yes) N (no)
on | off
on | off
Parameter specified for scan timeouts
Parameter specified for the number of entries for the table
Send-Added Send-Removed
off off
show wireless ports interface client-scan configuration
Timeout Max-Size
600 128
1363