Unconfigure Ospf - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

unconfigure ospf

unconfigure ospf {vlan <vlan-name> | area <area-identifier>}
Description
Resets one or all OSPF interfaces to the default settings.
Syntax Description
vlan-name
area-identifier
Default
N/A.
Usage Guidelines
None.
Example
The following command resets the OSPF interface to the default settings on the VLAN accounting:
unconfigure ospf accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a VLAN name.
Specifies an OSPF area.
unconfigure ospf
1603