Show Wireless Ports Interface Client-History Mac-Layer - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface client-history mac-layer

show wireless ports [<portlist> | all] interface [1 | 2] client-history
mac-layer <mac_address>
Description
Displays 802.11 MAC layer information collected on a per-client basis.
Syntax Description
portlist
all
interface
mac_address
Default
N/A
Usage Guidelines
Use this command to display information on the operation of the 802.11 MAC layer.
Example
The following example displays client-history information for port 1:25 and interface 1 based on the
MAC address of the client:
show wireless ports 1:25 interface 1 client-history mac-layer 00:0D:54:98:AC:35
The output of the command is similar to:
Intf
AP Mac address
Authentication Information
Authenticated
Total AUTH REQ
Total AUTH RESP
Total AUTH OK
Total AUTH Failed
Total AUTH (open)
Total AUTH (shared)
Last AUTH REQ
Last Auth Type
Authentication Error Information
Last Error Time
Last Error Type
Errors by Type
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5.
Specifies all active ports.
Specifies an interface: 1 or 2.
Specifies the MAC address of the wireless client.
Sequence Number
Challenge Text (key)
Type Mismatch (open|shared)
show wireless ports interface client-history mac-layer
: 1:25:1
: 00:0D:54:98:AC:35
: Y
: 1
: 1
: 1
: 0
: 0
: 1
: 19:40:06
: OPEN
: 00:00:00
: NONE
: 0
: 0
: 0
1359