Show Wireless Ports Interface Ap-Scan Results Mac-Address - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands
show wireless ports interface ap-scan results
mac-address
show wireless ports [all | <portlist>] interface [1 | 2] ap-scan results
<mac-address>
Description
Displays information about an access point (AP) whose MAC address is selected from the AP scan
results table.
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
mac-address Specifies the MAC address selected from the AP scan results table.
Default
N/A
Usage Guidelines
Use this command to get information about an AP using its MAC address.
Example
The following example display information about an AP by MAC address:
show wireless ports 1:8 interface 2 ap-scan results 00:04:96:5:80:B0:
The output of the command is similar to:
AP Mac Address Intf
================================================================================
00:04:96:05:80:B0 1:8:2
History
Platform Availability
1352
ESS Name AvgRSS Type Chan WEP WPA Last
Extreme_g 8 bss 11 Y 23:53:34
ExtremeWare 7.5 Command Reference Guide