show wireless ports interface client-history diagnostics
show wireless ports [<portlist> | all] interface [1 | 2] client-history
diagnostics <mac_address>
Description
Displays counters and errors the information collected on a per-client basis.
Syntax Description
portlist
all
interface
mac_address
Default
N/A
Usage Guidelines
Use this command to display diagnostic counters and error information contained in the
extremeWirelessClientDiagTable.
Example
The following example displays client-history diagnostics information for port 1:25 and interface 1
based on the MAC address of the client:
show wireless ports 1:25 interface 1 client-history diagnostics 00:0D:54:98:AC:35
The output of the command is similar to:
Interface
AP Mac Address
State Watermark
Events In Detected
Enters
Errors
AUTH REQ
Other
MGMT Action
Time Outs
Events In Authenticated
Enters
Errors
ASSOC REQ
Other
MGMT Action
Time Outs
Events In Associated
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5.
Specifies all active ports.
Specifies an interface: 1 or 2.
Specifies the MAC address of the wireless client.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1:25:1
00:0D:54:98:AC:35
FORWARDING
1
0
0
1
0
0
1
0
1
1
0
0
show wireless ports interface client-history diagnostics
1357