Table of Contents
Advertisement
CHAPTER 20
Configuring Firewall in J Series Services
Routers and SRX Series Services
Gateways
Configuring the Firewall Filter for Any Family Type (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring the Firewall Filter for Any Family Type (NSM Procedure) on page 315
Configuring the Firewall Filter for Bridge Family Type (NSM Procedure) on page 317
Configuring the Firewall Filter for Ccc Family Type (NSM Procedure) on page 319
Configuring Filters for inet Family Type (NSM Procedure) on page 321
You can specify any to filter packets based upon protocol-independent fields.
To configure firewall filter in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Firewall > Family > Any.
3.
Add or modify settings as specified in Table 198 on page 316.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
315
Advertisement
Table of Contents
