Table of Contents
Advertisement
DAI Peripherals
Miscellaneous Buffers
The miscellaneous buffers are used to interconnect signals from different
routing groups. These buffers are similar to the DAI pin buffers with three
basic differences.
1. Only for internal connections, no pin buffer enable required
2.
MISCxx_O
Group F (
3.
MISCxx_I
The miscellaneous buffers act as intermediate buffer connections between
the peripheral's source node and the pin buffer enable destination node.
This allows for routing that is not possible among a single group.
The miscellaneous buffer allows interconnects which are not sup-
ported within a single DAI routing group.
OUTPUT
PBEN_I
INPUT
MISCxx_I
Figure 5-8. Miscellaneous Buffer
5-12
www.BDTIC.com/ADI
output always feeds DAI interrupt latch register and
)
PBENx_I
input sources collected from different groups
MISCxx_O
MISC.
IN
BUFFER
ADSP-2136x SHARC Processor Hardware Reference
for the ADSP-21362/3/4/5/6 Processors
OUT
INTERRUPT LATCH
DAI
Advertisement
Table of Contents
