Using The Antenna/Cable Editor; How To Use The Antenna/Cable Editor - Keysight A Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
—
—
—
When finished, press

Using the Antenna/Cable Editor

The Antenna Editor and the Cable Editor menus are very similar. Both tables
include header information, and a Frequency/Value table.
Figure 9-2 FieldFox Antenna Editor– E–Field and H-Field Units Displayed

How to use the Antenna/Cable Editor

1. Press Scale/Amptd >
2. Then
Keysight N9927-90020 User's Guide
Save Antenna/Cable
specified Storage Device.
Recall Antenna/Cable
specified Storage Device.
Storage Device Choose from: Internal, USB, SD. Learn more about these
selections in "Set File Type and Select Device" on page
Back
E-Field Units
Before editing the antenna settings, it is important to know whether
you are using a magnetic H-field (dB S/m) or electric E-field (dB /m)
antenna. When you setup the Antenna Factor Correction table, you
will select one of these two units so that the FieldFox knows how to
convert the measurement data to various Field Strength Amplitude
units.
Edit Antenna or
Save the modified Antenna/Cable to a file on the
Read an existing Antenna/Cable file from the
to return to the previous menu.
More Corrections
>
Edit Cable to open the Antenna / Cable Editor.
784.
H-Field Units
177