How To Define A Channel And Use Channel Scanner - Keysight A Series User Manual

Channel Scanner (Option 312)
How to Set Up Channel Scanner
Data Log-Play files are saved to:
7. Outdoor Mapping: Export KML file into 3rd party mapping software (i.e.,
Learn more, refer to
page

How to Define a Channel and Use Channel Scanner

Channel definitions consist of the following:
— Each channel is defined by CF and Integration BW.
— Frequency span is set automatically to 1.5 x Integration BW
— Power is measured over the Integration BW
Using Channel Scanner, refer to:
—
—
Then:
—
—
—
—
—
628
— Save Image (PNG)
(default filename is "MapImageFile").
If File Folder is set to Default then Data Log-Play files are
—
save-recalled to:
"[CurrentDevice]\RecordPlayback\CS"
If File Folders are set to System, then Data Log-Play files are
—
save-recalled to:
"CurrentDevice\<UserSelectedFolder>\
Google or Google Earth)
Chapter 16
484. See also, Chapter 32, "File Management."
"Step 1A: Scan Mode: Range Channel Defined" on page 629
"Step 1B: Scan Mode: Custom List Channel Defined" on page 630
"Step 2: Select Display Type" on page 631
"Step 3. Modify Scale and the Display Color Bar Settings" on page 635
"Step 4: Enable Data Logging and Record Results" on page 636
"Step 5: Save the Log Results:" on page 639
"Step 6: Import and Play back KML Files into 3rd Party Software (Example:
Google Earth with Animation Tool)" on page 641
Saves the current displayed map to a *.png file
Mapping and "Setting up Data Logging" on
Keysight N9927-90020 User's Guide
or