Custom Radio Standards; How To Import And Delete A Custom Radio Standard; Channel Selection; How To Enable Channel Selection - Keysight A Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
— Then select a standard using the

Custom Radio Standards

Your own custom Radio Standards can be imported into the FieldFox. Custom
standards are created in *.csv (spreadsheet) format.
A template and instructions for creating your custom Radio Standard is at:
http://na.support.keysight.com/fieldfox/help/SupHelp/Reference/CustomRa
dioStandard.htm
Once imported, the *.csv file is stored in the FieldFox \User Data\ folder. The
custom Radio Standards are read and presented at the top of the list of internal
Radio Standards.

How to Import and Delete a Custom Radio Standard

First, press Save/Recall and select the
will be read. Most likely this will be USB or SD Card.
— Press Measure 1 OR Freq/Dist then
— Then
— Then
— Then
— Then select the *.csv file using the
— Custom Radio Standards can be removed from the FieldFox by selecting
— Then select the *.csv file to delete using the
To overwrite a custom standard that is already uploaded to the FieldFox,
you must first delete the *.csv file from the FieldFox, then re-upload the file
that contains the standard. A predefined internal standard (such as GSM
450) can NOT be deleted from the FieldFox.

Channel Selection

After a Radio Standard has been selected, the frequency range can be
changed by selecting channel numbers rather than frequency. Once enabled,
the channel number is appended to the X-axis frequency range.

How to Enable Channel selection

— Press Freq/Dist
168
Enter.
Radio Standard
Radio Standard
Import Radio Standards
Enter.
Measure 1 then Radio Standard
press Enter.
arrows or rotary knob and press
Device from which the Radio Standard
More
arrows or rotary knob and press
then Delete Radio Standard.
arrows or rotary knob and
Keysight N9927-90020 User's Guide