Discrete Colors Softkey Menu; Using The Discrete Colors Softkey Menu; System Configuration; Options (Licensing) - Keysight A Series User Manual

System Settings

Discrete Colors Softkey Menu

Discrete Colors Softkey Menu
The discrete colors softkey menu can be used to increase the choice of colors
displayed from two to up to six colors, for easier measurement readings. Refer
to
Figure 30-7 Display Example: Color Coded Bar Scale (x6 Colors)

Using the Discrete Colors Softkey Menu

1. Press System 7 >
2. Choose from the following:

System Configuration

Options (Licensing)

You can view and install options on your FieldFox. To see a comprehensive list
of the options that are available, view the FieldFox Configuration Guide at:
https://www.keysight.com/us/en/assets/7018-03329/configuration-guides/
5990-9836.pdf.

How to view the Installed Options

1. Press System 7 >
2. Then
The currently installed options are listed.
Keysight N9927-90020 User's Guide
Figure 30-7.
Preferences
— Discrete Colors ON OFF
greater than 2.
— Number of Colors
(default) = 2, red and blue).
— High Power Red Blue
indicate the highest power levels (default = Red).
System Configuration
Options (Licensing)
Show Options
> Discrete Colors
– to enable/disable the discrete colors
– choose up to 6 discrete colors (Minimum
– choose red or blue to choose the color to
System Configuration
> >
757