Selecting And Viewing Corrections; How To Use The Antenna Softkeys - Keysight A Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings

Selecting and Viewing Corrections

— Press Scale/Amptd >
—
—

How to Use the Antenna Softkeys

The following menu appears when any of the above Antenna or Cable softkeys
are pressed:
—
—
—
176
— Cable Off – Opens a softkey menu to enable/disable a cable and edit,
save, create a new cable description table, recall, and set a storage
device location.
— More – Opens a softkey menu to View Corrections and set the
Amplitude Correction type for your antenna.
Learn more, see
— SrcSide Antenna Off / On
transmit.
— RcvrSide Antenna Off / On
receive.
— SrcSide Cable Off / On
Source side.
— RcvrSide Cable Off / On
Receiver side.
View Corrections ON OFF
corrections. This is a composite of all cable/antenna corrections that are
currently applied. Available as a useful visual aid, the zero "dB" level (no net
correction) is mapped to appear at the -50 dBm on-screen level.
Amp Corr Select [Triaxial XYZ]
— Default Receiver side only antenna measurements.
— Src/Rcvr Split to work with non-triaxial receiver and source side
antenna measurements.
— Triaxial XYZ (default, when Channel Power is on and when a
compatible triaxial antenna's factors have been imported) for
measuring channel measurements and EMF.
Antenna/Cable ON OFF
Edit Antenna/Cable Edit an Antenna/Cable Correction table. See Using the
Antenna/Cable Editor (below) for more information.
New Create a new Antenna/Cable. See Using the Antenna/Cable Editor
(below) for more information.
"Selecting and Viewing Corrections" on page
Edit/Recall an Antenna file to be used to
Edit/Recall an Antenna file to be used to
Edit/Recall a Cable file to be used on the
Edit/Recall a Cable file to be used on the
More > Corrections >
Turn ON and OFF Pink Trace - Antenna/Cable
- then choose one of the following:
Turn correction ON or OFF for this Antenna/Cable.
Keysight N9927-90020 User's Guide
More
176.