Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode
(Option 233 on N991xA), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Record-Play files are saved to:
—
—
Learn more about file settings, refer to
Outdoor Mapping Only: Export KML File Into 3rd Party Mapping
Software
— Export KML file into 3rd party mapping software (i.e., Google Map or
Keysight N9927-90020 User's Guide
—
Save Log File
or
—
Recall Log File
(if you have previously stored data)
—
File Folder Default System
—
File Type
(Default = CSV) KML or DREC (DREC applies to Option 360
only)
—
Auto Save OFF ON
if power is lost (Default = OFF)
— Then
Back
If File Folder is set to Default then Record-Play files are save-recalled
to:
"[CurrentDevice]\RecordPlayback\[Current mode]\"
If File Folders are set to System, then Record-Play files are
save-recalled to:
"CurrentDevice\<UserSelectedFolder>\
Google Earth). Refer to
Software (Example: Google Earth with Animation Tool)" on page
(Default = Default) or
To enable/disable auto save to protect your data,
Chapter 32, "File Management."
"Import and Play back KML Files into 3rd Party
482.
491