Setting The Marker Counter Gate Softkey - Keysight A Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings

Setting the Marker Counter Gate Softkey

When AM Metric or FM Metric are selected, you can choose from the
following:
— Press Marker >
— Press Mkr->/Tools >
See also,
Figure 9-5 AM DSB (Metrics) – Demodulation Waveform
Keysight N9927-90020 User's Guide
— More – FM and FM Stereo only. Opens a softkey menu to
enable/disable the De-Emphasis softkeys.
——De-Emphasis OFF ON
applied to the demodulated signal.
——De-Emphasis T
the demodulated signal.
Peak
More
or FM Tune & Listen demodulated signal's counter window time
(Minimum = 1 ms and Maximum = 2s; default = 100 ms).
The Counter Gate softkey is not available when AM Tune & Listen, FM
(narrow) Tune & Listen, or FM (wide) Tune & Listen are enabled. Refer to
Figure 9-8 on page 195.
"How to use Marker Functions" on page
– Enables/disables the de-emphasis
– Sets the amount of de-emphasis applied to
> Mkr Properties > Counter Gate
713.
– Sets the AM
193