Table of Contents
Advertisement
USB Antennas – (Full Capability Requires EMF Option 358, and SA mode (Option 233
Mixed Analyzers))
Troubleshooting
Troubleshooting
If your USB antenna setup is not behaving as expected:
— Verify setup is correct by referring to
Preamplifier set to ON
454
Known as EMF Antenna)" on page
— If the FieldFox displays this error Error: USB antenna Error:
Not found is displayed, verify the USB antenna is
connected correctly or Unable to communicate with
antenna. Ensure it is connected. Verify the antenna
connection (i.e., Disconnect and reconnect the USB cable).
Press
EMF Antennas
If the FieldFox still displays the USB antenna error, try a different USB
antenna.
— If you are unable to view the X,Y, and Z antenna correction factors,
then:
Press Scale/Amptd >
Antenna (Off)
to On (Default == Off)
— If you are having problems with your measurement, verify the antenna
corrections have been enabled:
Press Scale/Amptd >
(default == Auto, enabled)
"How to Set Up a USB Antenna (Also,
449.
>
Import Antenna
More
>
Corrections
>
More
>
Corrections
>
Keysight N9927-90020 User's Guide
Antennas Off
>
Apply Corrections [Auto]
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
