Keysight A Series User Manual page 670

Noise Figure Mode (Option 356 – CPU2 Only)
How to Define a Noise Figure Measurement
Frequency Context – RF (DUT In)
The RF (DUT In) softkey can be used to define the DUT Type's RF Start, Stop,
Center, and Span frequencies. Refer to
Context" on page
Figure 30-5 DUT >Type [Amplifier] and [Multi-Stage Converter] > RF (DUT In)—Frequency
Context
DUT – Measurement Setup –
670
673.
Type [Amplifier] and [Multi-Stage Converter]
"Frequency Range and Frequency
Used for setting up Start,
Stop, Center, and Span
frequency context for a
DUT
– Type [Amplifier] and
[Multi-Stage Converter]
--Set the frequency context
based on the DUT Type
––Enter the RF (DUT In)
values for Start, Stop,
Center, and Span
frequencies
Keysight N9927-90020 User's Guide