To View And Edit The Maximum Number Of Records; Fieldfox Setting Changes During Record And Playback; During Recording - Keysight A Series User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)
You can determine the length of time over which recording can occur by
setting the Record Interval (the time between recorded traces) and other
settings. Learn more in

To view and edit the maximum number of records

Just after opening or initiating a session:
1. Press
2. Then
3. Press
4.
IMPORTANT! Pressing Clear All Records causes a loss of ALL of the session
data.

FieldFox Setting Changes during Record and Playback

During Recording

When any of the following State settings are changed during recording, the
State counter is incremented
the settings are saved to the Session file along with the first trace to be
recorded with the new setting. During playback, the trace and display
annotation will reflect the change on the screen.
State settings:
Refer to
the RTSA options.
288
"Recording Configuration" on page
Session Data
TraceRecordLimit <n>
recorded).
TraceRecordLimit <SingleTrace>
— SingleTrace – just a single trace is saved as a record.
— RangeTraces –
— AllTraces – All active traces are recorded.
Clear All Records Empties that session of recorded traces. Learn more in
"Manage Sessions" on page
Table 10-1 on page 289
(n = Max number of traces that can be
(Default == SingleTraces).
294.
("About State and User Tags" on page
for a list of the applicable state settings for
Keysight N9927-90020 User's Guide
292.
289) and