Certification And Compliance Statements; Certification - Keysight A Series User Manual

Safety Considerations

Certification and Compliance Statements

Certification and Compliance Statements

Certification

Keysight Technologies, Inc. certifies that this product met its published
specifications at the time of shipment from the factory. Keysight Technologies,
Inc. further certifies that its calibration measurements are traceable to the
United States National Institute of Standards and Technology, to the extent
allowed by the Institute's calibration facility, and to the calibration facilities of
other International Standards Organization members.
Keysight N9927-90020 User's Guide
Universal recycling symbol. This symbol indicates compliance with the China
standard GB 18455-2001 as required by the China RoHS regulations for
paper/fiberboard packaging.
This symbol marks the standby position of the power line switch.
This symbol marks the ON position of the power line switch.
This symbol marks the OFF position of the power line switch.
This symbol indicates the input power required is AC.
This symbol indicates DC voltage.
This symbol indicates a three-phase alternating current.
This symbol indicates frame or chassis terminal.
This symbol indicates the presence of a laser device.
This symbol identifies the Protective Conductor Terminal.
This symbol indicates the equipment is protected throughout by double or
reinforced insulation.
825