Keysight A Series User Manual page 465

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode
(Option 233 on N991xA), and GPS Receiver (Option 307))
Downloading and Using the FieldFox Map Support Tool
5. Saving your *.zip file to a storage device and importing your *.zip to the
For FTP, refer to Refer to
:MMEM SCPI commands in the
www.keysight.com.
IMPORTANT!
In the folder that contains your unzipped files, do NOT change any of the
Map file folders or filenames. Doing so will prevent the FieldFox from being
able to recognize the map files.
New downloaded Map folders, for the same map locations and zoom
levels, will overwrite any existing folders on the FieldFox.
Figure 16-9 New Maps Zip File – MapExample_1
Keysight N9927-90020 User's Guide
FieldFox:
a. Insert an SD card or USB storage device into your PC.
b. Open the PC's Downloads folder and find your *.zip file. (e.g.,
MapsZIP_Example_1). Refer to
c. Find your maps *.zip file.
d. Copy the *.zip file to your SD card or USB storage device.
e. Remove the SD card/USB storage device from your PC.
f. Insert the SD card/USB storage device into the FieldFox.
"Move (Copy) Files" on page 783
FieldFox Programming Guide
Figure 16-9 on page
and to the
on
465.
465