How To Define A Cell Or Cell(S) And Use Ota; Step 1: Lte Fdd (Option 370), Lte Tdd (Option 371), And 5Gtf (Option 377): Component Carrier (Cc) And Cell Defined - Keysight A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF
Option 377 (CPU2 Only)
How to Set Up Over–the–Air (OTA) Mode Settings

How to Define a Cell or Cell(s) and Use OTA

LTE FDD, LTE TDD, and 5GTF have only one predefined view (Table). You can
define measurements, which can be used to display up to four different views
(windows) simultaneously on the display screen. You can select which type of
data to display in each of the views from the Trace menu.
Cell definitions consist of the following:
— Set frequency according to DUT requirements
— Define cell settings
— Define component carrier(s) (CCs) settings
Example: Using OTA LTE FDD or 5GTF, refer to:
—
Then:
—
—
—
—
—
Figure 13-13 Cell Definition (LTE FDD) – (LTE TDD is similar)
Step 1: LTE FDD (Option 370), LTE TDD (Option 371), and 5GTF (Option
377): Component Carrier (CC) and Cell Defined
1. Press Preset then
2. Selecting an OTA mode: Press
3. Optimizing the FieldFox to scan for signals:
Keysight N9927-90020 User's Guide
"Step 1: LTE FDD (Option 370), LTE TDD (Option 371), and 5GTF (Option
377): Component Carrier (CC) and Cell Defined" on page 373
"Step 2: Select Trace Type" on page 376
"Step 3. Modify Scale and the Display Color Bar Settings" on page 378
"Step 4: Enable Data Logging and Playback the Results" on page 379
"Save 5: Save the Log Results:" on page 382
"Step 6: Import and Play back KML Files into 3rd Party Software (Example:
Google Earth with Animation Tool)" on page 383
Mode Preset (Factory)
Measure > LTE FDD or LTE TDD or 5GTF
373