Keysight A Series User Manual page 493

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode
(Option 233 on N991xA), and GPS Receiver (Option 307))
How to Use Data Logging (Option 352)
— Press Scale /Amptd >
Figure 16-22 Field Strength Annotation that can be Recorded and Played Back
If Data Logging or Playback is not occurring when you think it should,
check the following:
— Is the sweep in HOLD? (upper-left annotation), or check the Sweep
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Record or Playback Interval set too long? (Configuration
Keysight N9927-90020 User's Guide
More
— dBmV, dBuV, W, V, A, dBmA, or
See Figure 16-22 on page
menu for Continuous set to OFF.
settings.)
> Unit then choose:
dbuA (Default Units: dBm)
493.
493