How To Set Up Phased Array Antenna Settings; Option 360 Setup Procedure - Keysight A Series User Manual

5G Rapid Prototype Phased Array Antenna – Option 360

How to Set Up Phased Array Antenna Settings

How to Set Up Phased Array Antenna Settings
IMPORTANT! See also,
"SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers),"
Chapter 10, "RTSA (Real-Time Spectrum Analyzer) Mode—Option 350
(CPU2 Only)"
This section reviews the steps in setting up an Option 360 measurement. If you
are not familiar with this process or would like more information, refer to
to Define a Set Up a Scan and Use Option 360"
This section consists of:
—
Figure 14-11 Setting Up Option 360 Using Other Modes

Option 360 Setup Procedure

1. Connect your equipment similar to
2. Set FieldFox to use static IP address:
Keysight N9927-90020 User's Guide
"Alignments" on page
mode.
"Option 360 Setup Procedure"
Press System
— Then System Configuration
a. In the Setting screen, use the
or numeric keypad to highlight Obtain IP.
b. Press Edit
215, in NA
Figure 14-1 on page
> More > LAN
>Obtain IP Static
mode,Chapter 9,
and
"How
407.
arrows, the rotary knob,
415