About Enr (*.Enr), Preamplifier (*.Amp), And Dut (*.Dut) Files; Enr (*.Enr) Files - Keysight A Series User Manual

Noise Figure Mode (Option 356 – CPU2 Only)
How to Define a Noise Figure Measurement
Figure 30-10 Editing ENR Tables

About ENR (*.enr), Preamplifier (*.amp), and DUT (*.dut) Files

This section contains the following:
—
—
—

ENR (*.enr) Files

— ENR files are saved to, and recalled from, the NoiseFigure\ENR folder. If the
— ENR files are stored as *.enr files. Existing ENR files that are loaded into the
— To DELETE a *.enr file, use the Manage Files feature. Learn more in
684
"ENR (*.enr) Files" on page 684
"Preamplifier (*.amp) Files" on page 685
"DUT (*.dut) Files" on page 685
folder does not already exist on a USB or SD card, it is created
automatically before storing the file.
FieldFox can be overwritten. Your edited file will NOT be overwritten when
firmware is updated.
"Manage Files" on page 787.
Keysight N9927-90020 User's Guide
Uses existing ENR file format Refer
to
https://www.keysight.com/us/en/a
ssets/9018-01420/user-manuals/9
018-01420.pdf.
1. Three additional header fields
(used for uncertainty calculations)
—ENR Uncert Cov
–Γ Spec Style
–Γ Distribution
2. Auto Populate fields are not part
of the file. These fields are only
used to assist in filling the table
values.
(when a given auto-populate value
is turned on, its value fills in the
associated values in the table).