Keysight A Series User Manual page 645

Channel Scanner (Option 312)
How to Set Up Channel Scanner
The following menu appears when any of the above Antenna or Cable softkeys
are pressed:
—
—
—
—
—
—
When finished, press Back to return to the previous menu.
Field Strength Correction Examples
Refer to
Keysight N9927-90020 User's Guide
— View Corrections
Yellow Trace - Antenna/Cable corrections. This is a composite of all
cable/antenna corrections that are currently applied. Available as a
useful visual aid, the zero "dB" level (no net correction) is mapped to
appear at the -50 dBm on-screen level.
Antenna/Cable ON OFF
Edit Antenna/Cable Edit an Antenna/Cable Correction table. See Using the
Antenna/Cable Editor (below) for more information.
New Create a new Antenna/Cable. See Using the Antenna/Cable Editor
(below) for more information.
Save Antenna/Cable Save the modified Antenna/Cable to a file on the
specified Storage Device.
Recall Antenna/Cable
specified Storage Device.
Storage Device Choose from: Internal, USB, SD. Learn more about these
selections in "Set File Type and Select Device" on page
Figure 27-18 on page 646
> View Corrections ON OFF
Turn correction ON or OFF for this Antenna/Cable.
Read an existing Antenna/Cable file from the
and Figure 27-19 on page
Turn ON and OFF
784.
647.
645