Field Strength Measurements - Keysight A Series User Manual

Channel Scanner (Option 312)
How to Set Up Channel Scanner

Field Strength Measurements

To measure the strength of any signal transmitted through the air, an antenna
must be connected to the FieldFox. The Field Strength feature allows you to
enter the frequency response of the receiving antenna (the Antenna Factor)
and associated cabling, and then have amplitude corrections automatically
compensate the displayed trace for that response.
Figure 27-15 Overview of Field Strength for Channel Scanner (See also, Figure 27-16 on
page 643.)
FieldFox Field Strength Channel Scanner
Refer to Figure 27-16 on page 643
642 Keysight N9927-90020 User's Guide