How To Define A Set Up A Scan And Use Option 360; Step 1. Connect Your Equipment; Step 2. Set Fieldfox To Use Static Ip With Your Ball Antenna - Keysight A Series User Manual

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
How to Define a Set Up a Scan and Use Option
You can define measurements by selecting which type of data to display.
Data definitions consist of the following:
— Select the measurement type
— Define the antenna setting, using the antenna settings table
— Define other optional marker, sweep, averaging, bandwidth settings
Example: Refer to:
—
—
—
Then:
—
—
—
—

Step 1. Connect Your Equipment

Connect your equipment similar to

Step 2. Set FieldFox to Use Static IP with Your Ball Antenna

IMPORTANT! The LAN address for first 3 fields must match the Static IP
address of FieldFox. For example, the Ball Antenna's factory IP address is
192.168.0.10, set FieldFox Static IP address to 192.168.0.xx. "xx" must be
different number than shown in the last field of the for Ball Antenna. Refer
to
IMPORTANT! If you forget you N9910X-028 Ball Antenna's static IP
address, refer to this link and the Support tab for assistance:
www.keysight.com/find/fieldfox
Support Document.
— The Ball antenna's default static IP address is: 192.168.1.10
— Set FieldFox to use static IP address:
Keysight N9927-90020 User's Guide
"Step 1. Connect Your Equipment" on page 427
"Step 2. Set FieldFox to Use Static IP with Your Ball Antenna" on page 427
"Step 3. Define the measurement" on page 428
"Step 4: Select Polar Settings" on page 430
"Step 5. Modify Scale and Attenuator Settings" on page 430
"Step 6: Enable Data Logging and Playback the Results" on page 431
"Step 7: Import and Play back KML Files into 3rd Party Software (Example:
Google Earth with Animation Tool)" on page 434
Figure 14-15 on page
Press System
— Then System Configuration
360
Figure 14-1 on page
425.
and then to the Phase Array Antenna
> More > LAN
407.
427