Record Source - Keysight A Series User Manual

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
— The Mask file is saved to, and recalled from, the Save /Recall Storage
A mask that is in use during a recording is NOT saved with the recording and
does NOT automatically appear during playback. Like Limits Lines, it is saved
and recalled with a state file.
Although they are created in the same manner, Limit Line files and FreqMask
files can NOT be used interchangeably.
— Press Trace 6
— Then
— Then
— Then
— Then choose from the following

Record Source

The RawMeas data setting only applies to SA Mode.
For SA mode, the simplest way to use Record Playback is to record RawMeas
data, which can then be played back into all of the current Trace States.
However, for more complicated processing, refer to the following diagrams.
These figures illustrate where in the FieldFox data flow data is recorded and
played back.
For this discussion, it is important to understand Trace States. Learn more
in
Keysight N9927-90020 User's Guide
Device location – NOT from the Record Playback Storage Device
location. These are two different settings. Learn how to set the Save
/Recall Storage Device in
page 784.
Record Playback
New Session or
as soon as a session is opened.
FreqMaskTrigger Configuration
— Edit Mask Create or modify the current mask. Learn how to edit the
Mask / Limit Line table in
— Save Mask Saves the current mask to a file.
— Recall Mask Loads a mask file.
"Trace Display States (SA Mode)" on page
"Set File Type and Select Device" on
Recall an existing session. The current mask appears
"All about Limit Lines" on page
212.
715.
527