Group Save File Types; Cat (Distance Units) - Keysight A Series User Manual

System Settings
Preferences
6. Repeat steps
7. Press
8. Press

Group Save File Types

— State+Trace (.sta) – Enables/Disables .sta as a group. file to be saved when
— State (.sta) – Enables/disables .sta files as a group file to be saved when
— Image (.png) – Enables/disables .png files as a group file to be saved when
— CSV Data (.png) – Enables/disables .csv data files as a part of the group
— S1P Data (.s1p) – Enables/disables ..s1p data files as a part of the group
— S2P Data (.s2p) – Enables/disables .s2p data files as a part of the group
— Matalab Data (.mat) – Enables/disables .mat data files as a part of the
— SDF Data (.sdf) – Enables/disables .sdf data files as a part of the group files

CAT (Distance Units)

Choose the CAT distance units (i.e., Meters (default), Feet, Inches). See
Units" on page
How to select CAT distance units:
1. Press System 7 >
2. Then
754
3 through
Done Edit to exit the current data type softkey menu.
Done to exit the Preferences menu and save your Preferences.
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
group files to be saved when the Quick Save (Save/Recall 9) hardkey is
pressed for ~3 seconds.
to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for ~3
seconds.
83.
Preferences
Edit for each of the following:
— Distance Units:
— Meters (default)
— Feet
— Inches
— TDR Sweep:
5 as required.
Preferences
>
Keysight N9927-90020 User's Guide
"DTF