Importing A .Zip File To The Fieldfox - Keysight A Series User Manual

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode
(Option 233 on N991xA), and GPS Receiver (Option 307))

Importing a .zip File to the FieldFox

Importing a .zip File to the FieldFox
For FTP, refer to Refer to
:MMEM SCPI commands in the
www.keysight.com. See also,
Is On The LAN" on page
On the FieldFox:
Press System 7 >
1. Press
2. Verify your SD card/USB Source Device is selected.
3. Press
4. In the "Select .zip file to import" window that opens, if there is
5. Press
466
Utilities
Import Maps
If not then:
Press Source Device [Internal]
Import Maps (.zip)
more than one .zip file listed, select the .zip file you want to load by using
the arrows, or the rotary knob and then press
Refer to Figure 16-11 on page 468
Back to return to the previous menu.
"Move (Copy) Files" on page 783
FieldFox Programming Guide
"How to Set Up Mapping When the FieldFox
470.
> Mapping > Map Explorer (Get Maps)
> SD Card | USB
and Figure 16-11 on page
Keysight N9927-90020 User's Guide
and to the
on
Recall File.
468.