Using Ota (Options 370 - Lte Fdd, 372 - Tdd, And 377 - 5Gtf) - Keysight A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF
Option 377 (CPU2 Only)
Using OTA (Options 370 – LTE FDD, 372 – TDD, and 377 – 5GTF)
Using OTA (Options 370 – LTE FDD, 372 – TDD, and 377 – 5GTF)
OTA enables you to do the following:
Measure and display one component carrier (CC) with multiple cells or multiple cells with
multiple component carriers (CCs)
Four Display Types:
— Bar chart (color coded based on the
— Table
Color Coded Display Types:
— Specify high and low power with
Flexible Data Sorting:
— LTE FDD: Sort Cells, component
— LTE TDD: Sort Cells, component carriers
Data Logging. Record GPS stamped data measurements
— Define measurement interval by time
— Show results in Table or Bar Chart
Keysight N9927-90020 User's Guide
selected scheme CC | PCC | Level)
color bars
carriers (CCs), Frequency, RSRP,
RSRQ, RSSI, PSS, SSS, and SINR
scan results displayed by low to
high, or high to low, or Auto (no
order is involved)
(CCs), Frequency, RSRP, RSRQ, RSSI, PSS,
SSS, and SINR scan results displayed by
low to high, or high to low, or Auto (no
order is involved)
or distance
a. When multiple component carriers are selected, the results of the component carrier
(CC) with the highest power is displayed.
b. LTE FDD and LTE TDD can measure and display multiple cells. 5GTF only has the ability
to measure and display a single cell.
ab
— Strip Chart
— Spectrum
— 5GTF: Sort Carrier Info, PCI (aka Cell
IDs), Power, PSS, SSS, Sync
Correlation (%) scan results
displayed by low to high, or high to
low, or Auto (no order is involved)
— Display files (KML) on Google Maps
or Google Earth
351