How To Create And Move A Display Line; Audio Beep At Marker Power; How To Use Audio Beep - Keysight A Series User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
RTSA Mode Settings
Figure 10-6 Display Line with Annotations

How to create and move a Display Line

— Press Limit __8
— Then
— Then enter a Y-axis value using the
Learn more,

Audio Beep at Marker Power

When enabled, the Audio Beep feature emits a repetitive beep sound which
varies in tone pitch and repetition rate to indicate the relative power level of the
active marker. The highest tone pitch and fastest beep rate occurs when the
marker Y-axis position is at the top of the display. Conversely, the lowest pitch
and repetition rate occurs at the bottom of the display. Therefore, it is
important to scale the signals that you intend to measure between the top and
bottom of the screen. Learn more about Scale in
page
Audio Beep can be used with any marker type or function, including
Band/Interval Power. Learn more in

How to use Audio Beep

1. Press Marker
Keysight N9927-90020 User's Guide
Display Line OFF ON
press Enter. Or enter a value using the numeric keypad and press a suffix
key or press Enter.
"All about Limit Lines" on page
266.
arrows or the rotary knob, then
715.
"Scale and Units" on
"Audio" on page 749.
283