How To Manually Set Date And Time, Format, And Time Zone; Lan Settings - Keysight A Series User Manual

System Settings
System Configuration
1. Press System 7 >
2. Connect a LAN cable that is also connected to the Internet.
3. Then press
— Optional: Set the following when a Proxy server is used to connect to the

How to MANUALLY set Date and Time, Format, and Time Zone

Because of licensing security, the manual and GPS Sync methods to set
Date and Time are restricted as follows:
– Can be set backward no more than 5 hours at a time.
– Can be set forward any amount of time.
– Can be set backward or forward no more than once in a day. A new day
begins at midnight.
– There is no restriction for setting the Time Zone.
– To change the Date and Time backward a significant amount, send an
email to csg.servicedesk@keysight.com.
BEFORE manually setting the Date and Time, be absolutely certain that the
Time Zone setting is correct.
1. Press System 7 >
2. Press the
3. Then press Edit.
4. Use the
5. Press Cancel or Done when the edits are complete.
6. Press

LAN Settings

Configure the LAN settings to be used to communicate with the Data Link
Software and connect to the FieldFox for remote SCPI operation. Learn more
about Data Link at: www.keysight.com/find/fieldfoxsupport.
Keysight N9927-90020 User's Guide
System Configuration
Internet
Update Time using
displayed indicating the amount of time correction that occurred.
internet:
— Proxy Host – Enter the name of the proxy host.
— Proxy Port – Enter the port number of the proxy host.
System Configuration
arrows to highlight the row to be edited.
arrows or rotary knob to select and to edit a field.
Done to exit the Date and Time settings. The readout in the
upper-right corner of the FieldFox screen will update accordingly.
More Update Time using
> >
Internet. When successful, a message is
More Date and
> >
Time.
767