Preamplifier (*.Amp) Files; Dut (*.Dut) Files - Keysight A Series User Manual

Noise Figure Mode (Option 356 – CPU2 Only)
How to Define a Noise Figure Measurement

Preamplifier (*.amp) Files

— Preamplifier (*.amp) files are saved to, and recalled from, the
— Preamplifier files are stored as *.amp files. Existing *.amp files that are
— To DELETE a *.amp file, use the Manage Files feature. Learn more in

DUT (*.dut) Files

— DUT (*.dut) files are saved to, and recalled from, the NoiseFigure\DUT
— DUT files are stored as *.dut files. Existing *.dut files that are loaded into the
— To DELETE a *.dut file, use the Manage Files feature. Learn more in
Keysight N9927-90020 User's Guide
NoiseFigure\Preamp folder. If the folder does not already exist on a USB or
SD card, it is created automatically before storing the file.
loaded into the FieldFox can be overwritten. Your edited file will NOT be
overwritten when firmware is updated.
"Manage Files" on page
folder. If the folder does not already exist on a USB or SD card, it is created
automatically before storing the file.
FieldFox can be overwritten. Your edited file will NOT be overwritten when
firmware is updated.
"Manage Files" on page
787.
787.
685