Scale And Units; External Gain - Keysight A Series User Manual

Electromagnetic Interference (EMI) Measurements – Option 361
EMI Measurements Mode Settings
— Follow each of these, when prompted, by entering a value using the
— When using the
— After using the keypad, select a multiplier key. Learn more in

Scale and Units

EMI Measurements mode defaults to Scale Type: Log.
Learn more, refer to

External Gain

Refer to
332
——Log Freq AxisX
Disabling the log frequency X-axis, enables the linear
frequency X-axis (Default = ON).
——CF Step then type a step size value using the numeric keypad,
then select a frequency unit terminator key (Default = Auto).
——Full Span
frequency span (frequency span is model dependent).
This softkey is inactive (grayed out), for CISPR Zoom Scan and
APD Statistics, because RF tuning is fixed and Span changes
are not allowed.
For CISPR Band Scan the Full Span varies based on the 6 dB
resolution BW setting:
If the 6dB Resolution BW is auto-coupled, Full Span changes the span
to match the Full CISPR Band you have selected. Learn more see,
to Set the EMI Measurement Settings (Fast SA Scan, CISPR
Band Scan, CISPR Zoom Scan, and APD Statistics)" on
page
If the 6 dB resolution BW is set to manual, Full Span changes the span
to the maximum span limits described in the table in
Bandwidth (Res BW)" on page
numeric keypad, the
arrows is based on the current span.
Abbreviations" on page
"Scale and Units" on page
"External Gain" on page
enables/disables the log frequency X-axis.
the frequency span changes the instrument's full
333.
arrows, or the rotary knob.
arrows, press Enter. The increment setting of the
56.
172.
Keysight N9927-90020 User's Guide
"Resolution
338.
"Multiplier
171.
"How