How To Play A Data Log - Keysight A Series User Manual

5G Rapid Prototype Phased Array Antenna – Option 360
How to Use Data Logging/Playback (Option 360)
— Then
Learn more, refer to

How to Play a Data Log

— Press Trace 6
— If the session is already open, skip the following step. Otherwise:
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
end of the recording is reached, playback begins at the start of scan and
continues to loop indefinitely.
During playback, choose from the following:
—
—
—
Keysight N9927-90020 User's Guide
Record Save/Recall
— Then Device (Internal (default), SD Card, or USB)
— Then File Type (CSV, DREC (Option 360 only), or KML (default))
Chapter 32, "File
Data Logging > Record Save/Recall
— Then Recall Log File
highlight the file to be played.
——Then Recall File
——Then Back
— Then Play to playback your Table data.
is displayed in the left of screen graticules during playback. When the
Pause Resume Temporarily halts playback. Then choose from the following:
— Pause Resume
Stop Immediately stops playback. Then choose from the following:
— Play Start playback from start of scan.
— Recall Logs Opens a list of stored data files.
Select a file to playback.
— Recall File
— Back
Cursor Position use this softkey to move the data log play cursor in the
current data log being played (i.e., Cursor Position is active only when
playback is paused).
Management".
use the Use the RPG or the
Press to continue playing.
arrow keys to
439