Keysight A Series User Manual page 779

File Management
Saving and Recalling Files
If you are having difficulty saving to a USB flash drive, it may be a timing
issue. The turn-around time for "file open, write data, file close" to a USB
drive is much longer than to FieldFox's internal memory. Alternative
methods are:
– Save your content to the FieldFox's internal memory; and then move your
files off to a USB flash drive using FTP SCPI programming. Refer to
(Copy) Files" on page 783
FieldFox Programming Guide
and Product Support).
– Save your data to the FieldFox's internal memory, then move the data to
a PC using a binary block transfer, and delete the data from the FieldFox's
internal memory. An example for transferring an image in the
Programming Guide
Support.
Please note that the receiving computer program needs to be able to
handle the binary block transfer.
See also
by FieldFox? - Technical Support Knowledge Center Open
I
files.
Saving MATLAB files
If you have Option 351 I/Q Analyzer option, you can directly save your data
as MATLAB files (*.mat). Refer to
351 (CPU2 Only)", on page
If you have the FieldFox's Remote Server mode (89600 VSA software
connectivity), you can use the VSA software to capture and record your
data as MATLAB files (*.mat). Learn more about FieldFox and 89600 VSA
software, refer to
SA Hardware/SA Option 233)"
http://rfmw.em.keysight.com/wireless/helpfiles/89600B/WebHelp/89600
.htm.
Keysight N9927-90020 User's Guide
(via FieldFox Manuals, Firmware, Software and Product
What Should I Do If My USB Flash Drive Could Not Be Recognized
nsert only ONE USB flash drive in the FieldFox when saving or copying
Chapter 17, "Remote Server Mode (Requires CPU2 and
and to the :MMEM SCPI commands in the
(via FieldFox Manuals, Firmware, Software
Chapter 11, "IQ Analyzer (IQA) – Option
297.
and to
"Move
FieldFox
(keysight.com).
779