Keysight A Series User Manual page 262

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
Effective Isotropic Radiated Power (EIRP) – (Requires CPU2, SA Mode Only)
2. Configure Center frequency, Span, Preamp, and RF Attenuation
3. Configure Center frequency, Span, Preamp, and RF Attenuation
4. Summary of EIRP setup, per step
5. Start EIRP: Press
6. When done press:
7. Optional: To clear the saved horizontal and vertical EIRP values press:
262
— Save Horizontal
— Save Vertical – Saves the current vertical EIRP value (dBm).
— Clear H & V –Clears the saved horizontal and vertical EIRP values
(dBm).
— Press Freq/Dist >
— Press Freq Span
— Press Scale Amptd >
— Press RF Atten Auto
— Press Freq/Dist >
— Press Freq Span
— Press Scale Amptd >
— Press RF Atten Auto
— Press Rx Ant Gain
— Press Dist to Ant
— Press Rx Cable Loss
— Press Margin Comp
Restart
Save Horizontal and
Save Vertical
Clear H & V
– Saves the current horizontal EIRP value (dBm).
Center > 2 GHz
> 3 MHz (default)
Preamp ON (default = OFF)
>
(default = Auto)
Center > 2 GHz
> 3 MHz (default)
Preamp > ON (default = OFF)
(default = Auto)
.
1
For this example: 30 dB > Enter.
For this example: 100m (default)
For this example: 2.5 dB
Keysight N9927-90020 User's Guide