How To Select Spectrogram; How To Modify The Spectrogram; How To Create Time Markers (Sa Only) - Keysight A Series User Manual

Interference Analyzer (SA Mode) – Option 236
Spectrogram and Waterfall Displays
— Resolution (Number of Points). Learn more in

How to select Spectrogram

— Press Meas 1
— Then
— Then

How to modify the Spectrogram

You can change how the spectrogram is displayed relative to the data trace.
This setting affects the total number of trace records that can be displayed.
For SA Mode:
— Press Meas Setup 4.
— Then
— Then
— Then choose from the following:

How to create Time Markers (SA Only)

Use Time Markers to determine the elapsed time between any two displayed
records. The most recent record appears at the bottom of the screen.
— Press Meas Setup 4
— Then
— Then
— Then enter a value from 0 (the most recent sweep record) to the maximum
— Then
— Then enter a value from 0 (the most recent sweep record) to the maximum
Keysight N9927-90020 User's Guide
Interference Analysis
Spectrogram
Spectrogram Settings
Spectrogram View
— Overlay Displays the data trace over the spectrogram with NO
graticules. Total trace records: 340.
— Full Screen Displays the spectrogram with NO data trace. Total trace
records: 340.
——Top Displays the data trace below the spectrogram. Total trace
records: 130.
——Bottom Displays the data trace above the spectrogram. Total
trace records: 130.
Time Markers
Time
value, using the numeric keypad,
indicates the Time Marker.
Delta
value, using the numeric keypad,
indicates the Delta Marker.
"Points" on page
arrows, or the rotary knob. A ">"
arrows, or the rotary knob. A ">>"
212.
517