Keysight A Series User Manual page 489

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode
(Option 233 on N991xA), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Keysight N9927-90020 User's Guide
To enable the Record Data softkey, move the cursor using
the arrow hardkeys or the RPG to highlight the Location:
Value cell in the table. Begin walking with an antenna and
press Record Data as required to map a location.
— More Opens a menu of softkeys to Undo, set Labels &
Icons, RPG actions, Save Image, and Back.
Labels & Icons
Undo
RPG [Zoom]
Opens a softkey menu where you can
enable/disable and select map icons:
Labels OFF ON
——
Enables/Disables map data
point labels. When enabled, a
label is displayed for every
map data point (e.g., "Data
1"). When disabled, labels are
not displayed for the map data
points.
Icons Flag Point Line
——
the type of icon that is used to
display a map's data points.
Pointer OFF ON
——
Enables/disables the bore
sight pointer.
To undo last indoor map setting change
Opens a menu to set the RPG's functionality for
mapping. Choose from:
Zoom
—— - (default) Zooms
in/out.
<––>
—— - RPG knob moves the
map East or West.
^|v
—— - RPG knob moves the
map north or south.
-
- Sets
-
489