Keysight A Series User Manual page 311

IQ Analyzer (IQA) – Option 351 (CPU2 Only)
I/Q Analyzer (IQA) Mode Settings
available. Otherwise, only the data results from the current measurement
(Spectrum or Waveform) are available. See also
Mode)" on page
The Trace and Trace State keys are used to choose how many traces of the
data result are displayed, and the trace data type (Clr/Wr, MaxHold, MinHold,
Average, View, or Blank) that are displayed for each measurement.
— Press Trace 6.
— Then choose from the following:
Keysight N9927-90020 User's Guide
321.
— Window 1 2 3 4 Changes the selected window (default: 1).
Then select one of the following:
— Win State ON OFF
or 4) selected by the Window 1 2 3 4 softkey (default: Window 1 is set
to ON).
— Data Sets the data type displayed.
Then select one of the following:
For Spectrum Measurement:
Mag Spectrum
Time Summary – Time Summary result includes
the capture time, spectrum analysis time and
waveform start/stop time.
For Waveform Measurement:
I vs. Time – Imaginary vs. Time
Q vs. Time – Quadrature vs. Time
Q vs. I – Quadrature vs. Imaginary
RF Envelope
Phase vs. Time
Unwrapped Phase vs. Time
Time Summary – Time Summary result includes
the capture time, spectrum analysis time and
waveform start/stop time.
"Trace Display States (IQA
Enables or disables the current Window (1, 2, 3,
311