Keysight A Series User Manual page 499

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode
(Option 233 on N991xA), and GPS Receiver (Option 307))
How to Use Data Logging (Option 352)
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
end of the recording is reached, playback begins at the start of scan and
continues to loop indefinitely.
During playback, choose from the following:
—
—
—
— Press
Keysight N9927-90020 User's Guide
Data Logging > Record Save/Recall
— Then Recall Logs
highlight the file to be played.
——Then Recall File
——Then Back
— Then Play to playback your Table data.
is displayed in the left of screen graticules during playback. When the
Pause Resume Temporarily halts playback. Then choose from the following:
— Pause Resume
Stop Immediately stops playback. Then choose from the following:
— Play Start playback from start of scan.
— Recall Logs Opens a list of stored data files.
Select a file to playback.
— Recall File
— Back
Cursor Position use this softkey to move the data log play cursor in the
current data log being played (i.e., Cursor Position is active only when
playback is paused).
This softkey is only available in Channel Scanner and Phased Array Antenna
modes (i.e., The Cursor Position softkey is not available for OTA mode).
Maps – to open a softkey menu enable map view and related features
(e.g., Data Selection, Red/Blue Limits, Labels & Icons, Zoom). Learn more,
"Enabling Outdoor Map Logging" on page
use the Use the RPG or the
Press to continue playing.
484.
arrow keys to
499