How To Use Data Logging/Playback (Option 360); Screen Annotation - Keysight A Series User Manual

Hide thumbs Also See for A Series:

Table of Contents

5G Rapid Prototype Phased Array Antenna – Option 360

How to Use Data Logging/Playback (Option 360)

Data log-Play files are saved to:

Data Logging and Playback enables you to log phased array antenna trace

data and play them back at a later time. Use this feature to monitor table data

activity over a period of time.

Data logs can be saved to the FieldFox Internal memory, an SD Card, or a USB

flash drive.

This section assumes you have already completed the initial setup and have a

phased array antenna scan displayed on the FieldFox.

During a data logging or playback session, the following is displayed in the

top-center area of the screen:

— The name of a recording can be changed using Manage Sessions. Learn

See also, the FieldFox User's Guide's "System Settings" chapter.

When GPS is enabled,

display. Learn more, see the FieldFox User's Guide's "System Settings"

The Phased Array Antenna mode can display and be data logging/played back

in field strength units, when the units are changed:

— Press Scale /Amptd >

If File Folder is set to Default then Data Log-Play files are save-recalled

"[CurrentDevice]\RecordPlayback\PAA"

If File Folders are set to System, then Data Log-Play files are

save-recalled to:

"CurrentDevice\<UserSelectedFolder>\

Rec: 55/55 2018-12-31 03:26:11 PM

is the current and total trace number: currently trace is 55 of 55 total

2018-12-3103:26:11 PM

Table of Contents