Keysight A Series User Manual page 433

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
2. Press
3. Outdoor Mapping only: Press
Keysight N9927-90020 User's Guide
or
— Then Recall Log File.
— Auto Save (default = OFF)
— Then Back
c. Optional: Press Indoor Map Data Logging
— Record Indoor Data
refer to Chapter 16
Setup Procedure" on page
— Then choose from
Pan, Record
— See also, Chapter 16
on page 484.
Back to return to previous menu.
— Pause Resume Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue
recording.
— Stop Immediately stops recording and a "Save the Log File" menu
opens to rename and save your data log file.
— (Press Record to begin a new recording.)
— Then Maps To enable map view and related features (e.g., Data
Selection, Red/Blue Limits, Labels & Icons, Zoom).
— View Map OFF ON
— Data Selection
data channel, sort type, and sort order. See also previous
step 10 in
on page 415.
— Red/Blue Limits
values to the red (high power limits) and blue (low power
limits) heat map display limits (defaults: Red Limit =
–20 dBm, Blue limit = –90 dBm).
— Labels & Icons
map data point labels and icon types.
Labels OFF ON
or Recall Indoor Log
Mapping and "Option 352 Indoor Maps
472.
Navigate OFF ON,
Data, More
Mapping and
Record to begin a new recording and then
Displays the current GPS location.
Opens a softkey menu to set the active
"How to Set Up Phased Array Antenna Settings"
Opens a softkey menu to assign power
Opens a softkey menu to enable/disable
Enables/Disables map data point labels. When enabled,
a label is displayed for every map data point (e.g., "Data
1"). When disabled, labels are not displayed for the map
data points.
then
File. Learn more,
Data Selection, Zoom,
"Setting up Data Logging"
433