SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
—
—
EMF Features
EMF has the following features:
EMF Measurement Results:
—
— Antenna control over X, Y, and Z antenna factors downloaded via USB
— Pass/Fail limit testing supported
— External PC not required
EMF uses the following data formats:
— Field Strength units:
240
"EMF Features" on page 240
"EMF Setup Procedure" on page 242
Measure and display corrected field strength in RMS average power
— dBµV/m – For use with E-field signals
— dBµA/m – For use with H-field signals
— dBG – dB Gauss
— dBpT - dB Tesla
Keysight N9927-90020 User's Guide