Keysight A Series User Manual page 368

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF
Option 377 (CPU2 Only)
How to Set Up Over–the–Air (OTA) Mode Settings
Figure 13-7 Single cell selected, but other cells displayed when CC0 to CCn has been
enabled. If ALL is selected, only the CC with the highest power is displayed.
(Not all of the detected data is displayed.)
Figure 13-8 Example of the LTE FDD Scan Results Table (Five CCs and one cell) – LTE TDD
is similar
1. When multiple component carriers are selected, the results of the component carrier (CC) with the highest
power is displayed.
368
1
Keysight N9927-90020 User's Guide