How To Enable/Disable Auto Append (Suffix); Press Printing; How To Print The Current Screen Or A Saved File - Keysight A Series User Manual

File Management

Press Printing

How to enable/disable Auto Append (Suffix)

1. Press Save/Recall 9 >
2. Then
Press Printing
The current screen or selected files can be printed using a PCL-compatible
printer (like older HP Deskjet printer) connected to one of the FieldFox USB
ports. Newer PCL3GUI photo and all-in-one printers are NOT supported.
Measurements can also be printed using the FieldFox Data Link software.

How to print the current screen or a saved file

To save ink, first select an outdoor (white background) display color. Learn how
in
1. Connect the printer to a FieldFox USB port. The print softkey will appear
2. Then press Save/Recall 9
3. Then
4. Make other print settings as desired.
Keysight N9927-90020 User's Guide
— OFF (default) to disable the prefix and suffix on subsequently saved
files. Edit Prefix and Edit Suffix softkeys are grayed out (inactive).
Auto Append
— OFF (default) to disable the Auto Append (number suffix) on
subsequently saved files. The Edit Number Suffix softkey is grayed
out (inactive).
"Display Colors" on page
ONLY when a compatible printer is connected.
Print and choose from the following:
— Printer & Page\nSetup
configured properly. The Status line should read "Ready'.
a. Select Files\nfor Printing
that are stored on the Internal drive. Images can NOT be printed
from the USB and SD card.
b. Edit the Quick Settings table to select up to FOUR Rows and FOUR
Columns for up to 16 total images to be printed on a single page.
c. If necessary, edit the filenames to be printed.
d. Select Done. Then
— Print Current Screen
using the selected Printer and Page Setup settings.
More Prefix Suffix
>
734.
- Confirm that the printer is connected and
- Print up to 16 *.PNG images on one page
Print Selected\nFiles
– Immediately prints the FieldFox screen
to begin printing.
793