Indoor And Outdoor Mapping - Option 352 (Requires Spectrum Analyzer Mode (Option 233 On N991Xa), And Gps Receiver (Option 307)) - Keysight A Series User Manual

Keysight Handheld Analyzers
N99xxA User's Guide
16 Indoor and Outdoor Mapping – Option 352 (Requires
Spectrum Analyzer Mode (Option 233 on N991xA), and
GPS Receiver (Option 307))
IMPORTANT!
B Model FieldFoxes measurements require an OML head
https://www.omlinc.com/.
a. Requires external mixer to down convert millimeter wave frequency to intermediate frequency (IF). Recommend
OML Inc. Contact OML directly www.omlinc.com for ordering information.
Option 352 maps signals that were measured using the SA RF Input Port 2
connector.
The FieldFox requires Option 352 for outdoor mapping and GPS (Option 307)
installed. And, one of the following, an Over–the–air (OTA) mode (LTE FDD
Option 370, LTE TDD (Option 371), 5G TF Option 377, or Channel Scanner
mode (Option 312), IQA (Option 351), or Phased Array Antenna (Option 360).
Also, requires browser that supports HTML5 (i.e., web browsers not supported:
IE6, IE7, and IE8).
Recommended, but not required, preamplifier (Option 235) to improve receiver
sensitivity.
Keysight's FieldFox handheld analyzer (with Option 352) combined with a USB
triaxial antenna (p/o EMF Measurements – Option 358) provides a unique,
portable solution for indoor and outdoor mappings in the field. Option 352
adds indoor and outdoor mapping capability to FieldFox analyzers, so that
FieldFox can import maps from OpenStreetMap (OSM) for data collection and
data plotting to the map directly on the FieldFox instrument display. The
FieldFox indoor and outdoor mapping feature resides at the System level and
the mapping capability can be enabled within the following modes:
— Channel Scanner (Option 312)
— Phased Array Antenna Support (Option 360)
— Over-the-Air (OTA) LTE FDD (Option 370)
— Over-the-Air (OTA) LTE TDD (Option 371)
— Over-the-Air (OTA) 5G TF (Option 377)
455
a
. Refer to