Keysight A Series User Manual page 728

— Power Meter, Pulse Measurements:
enable averaging (Default = Auto, Auto == FieldFox sets the average count based on
current mode settings).
— Or set the current count, using the
— CAT, NA: Average 1
3. Enter a value using the numeric keypad. Enter 1 for NO averaging.
4. Press Enter.
5. While Trace Averaging is in process, press Sweep 3 then
728
Data Analysis Features
All about Scale Settings
Average Auto Man OFF
change to a number >1 to enable/set averaging (Default = 1 (OFF)).
change to Auto or Man to
Num Averages softkey
Restart to restart the averaging at 1.
Keysight N9927-90020 User's Guide