Data Analysis Features; All About Markers; How To Create Markers; How To Move A Marker After It Is Created - Keysight A Series User Manual

Hide thumbs Also See for A Series:

Table of Contents

Markers move along the X-axis range of the measurement trace to provide a numerical readout of

each measured data point. Markers also allow you to search for specific Y-axis values.

A trace can contain up to six markers.

The marker readout on the FieldFox screen displays X and Y-axis information for the current active

marker ONLY.

A Marker Table can be displayed that allows you to simultaneously view X and Y-axis information

for all markers.

Markers can be used in CAT, EMI Measurements, I/Q Analyzer, NA, NF, RTSA, SA, Phased Array

Antenna, and Pulse Measurements Modes.

1. Press Marker.

Markers 1...6

to activate that marker. A marker is created on the trace in the middle of the

X-axis. That marker is now active.

4. Then move the marker using the rotary knob, the

position with the number keys.

5. Then press Enter.

— Press Marker.

Markers 1...6

Delta softkey is black to indicate the current setting of each marker.

— Then move the marker as when it was first created.

— Markers can also be moved using one of the marker search functions. Refer to

Markers" on page

Data Analysis Features

to select a marker to activate.

repeatedly until the marker of interest is selected. The OFF, Normal, Peak, or

arrows, or by entering an X-axis

Keysight N9927-90020 User's Guide

"Searching with

Show Quick Links

Table of Contents