Save 5: Save The Log Results - Keysight A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF
Option 377 (CPU2 Only)
How to Set Up Over–the–Air (OTA) Mode Settings
4. Press
To pause the log play:
1. Press
2. Press

Save 5: Save the Log Results:

Two file types are supported for save or recall log results:
— KML file format
— CSV file format. Files stored into this format can be imported into
382
Then choose:
— Optional (Bar Chart and Spectrum only): To adjust the following, use
the RPG (fine adjust) or the
change the color bar.
— Autoscale
current measurement.
— Ref Pos
— Scale
100 dB).
— Ref Level
Chart, Strip Chart, and Spectrum.
— Red Limit
Bar chart only.
— Blue Limit
(dBm). Bar chart only.
Stop to exit the log playing.
Pause Resume to pause or resume the log playing.
Stop to exit the log playing.
— Files stored in this format can be imported into 3rd party applications
like Google Earth or Google Maps.
spreadsheet applications.
arrow keys (coarse adjust) to
to have the FieldFox optimize the scale for the
to change the reference line position (0 to 10).
to change the reference line position (0.01 to
to change the top reference position in the Bar
to change the red color high power value (dBm).
to change the blue color low power value
Keysight N9927-90020 User's Guide